Bellesia B., Harrison R., Foussat A., Oliva A.B., Cornelis M., Poncet L., Felipe A., Moreno A., Barutti A., Barbero P., Echeandia A., Caserza B., Stenca S., Da Re A., Ribeiro J.S., Brocot C., Benaoun S., Rebollo E.B., Medrano J.C., Bue A.L.
Ключевые слова: ITER, coils toroidal, coils pancake, winding techniques, prototype, test results
Abramian P., Calero J., Garcia-Tabares L., Rodriguez E., Toral F., Gutierrez J.L., Martinez T., Sanchez L., Bandelmann R., *2 Brueck H.
Ключевые слова: accelerator magnets, design, prototype, design parameters, magnets quadrupole, magnets dipole, nucleation, quench, fabrication, test results, LTS, NbTi, high field magnets
Abramian P., Calero J., Garcia-Tabares L., Rodriguez E., Toral F., Brueck H., Martinez T., Sanchez L., Bandelmann R., Iturbe R., Lopez B., Gomez J., Rodilla E.
Ключевые слова: accelerator magnets, magnetization, magnets quadrupole, fabrication, high field magnets
Calero J., Toral F., Brueck H., Stolper M., Martinez T., Bandelmann R., Duda M., Gornicki E., Kotarba A.
Ключевые слова: magnets, laser application, magnets dipole, magnetic properties, experimental results
Bellesia B., Lucas J., Buskop J., Harrison R., Caballero J., Cornelis M., Cornella J., Galvan S., Losasso M., Poncet L., Heikkinen S., Batista R., Pedrosa N., Scheller H., Pando F., Pesenti P., Villa E.R., Valle N., Dormicchi O., Oliva B.A., Soto B.E., Robello B.E., Libens K., Moreno A., Barutti A., D'Urzo C., Francone R., Franchiello E., Barbero P., Ribeiro S.J., Rossi D., Bara X., Sorrentino S.
Ключевые слова: ITER, coils toroidal, fabrication, status, winding techniques, LTS, Nb3Sn, insulation, vacuum structure, heat treatment, termination, joints, prototype
Ключевые слова: ITER, magnetic systems, status, Europe, coils poloidal field, coils toroidal, cable-in-conduit conductor, LTS, Nb3Sn, design parameters, NbTi
Ключевые слова: HTS, Bi2212, thin films, fabrication, nanodoping, nanoscaled effects, substrate single crystal, PLD process, X-ray diffraction, microstructure, lattice parameter, critical temperature, resistivity, temperature dependence, composition, pinning, critical caracteristics, critical current density, self-field effect, fabrication, experimental results
Ключевые слова: HTS, Bi2212, films, doping effect, growth rate, magnetoresistivity, pinning, PLD process, substrate single crystal, nanodoping, nanoscaled effects
Abramian P., Calero J., Garcia-Tabares L., Rodriguez E., Rodriguez I., Toral F., Vazquez C., Karppinen M., Aragon F., Gama J.d., Gutierrez J.L., Martinez T., Sanchez L.
Ключевые слова: LHC, correction coils, accelerator magnets, irradiation effects, design, multipole magnets, fabrication, high field magnets, upgrade
Ключевые слова: HTS, Bi2212, films, doping effect, PLD process, pinning, fabrication, resistive transition, critical temperature, magnetoresistivity
Bellesia B., Buskop J., Harrison R., Rajainmaki H., Oliva A.B., Soto E.B., Boter E., Caballero J., Cornelis M., Cornella J., Galvan S., Losasso M., Poncet L., Heikkinen S.
Bellesia B., Buskop J., Harrison R., Rajainmaki H., Testoni P., Oliva A.B., Soto E.B., Boter E., Caballero J., Cornelis M., Cornella J., Galvan S., Losasso M., Poncet L., Heikkinen S., Verpont A.
Ключевые слова: ITER, coils toroidal, LTS, Nb3Sn, cable-in-conduit conductor, status
Barbero E., Batista R., Bellesia B., Bonito-Oliva A., Boter E., Caballero J., Cornelis M., Cornella J., Fernandez E., Fersini M., Guirao J., Jimenez M., Heikkinen S., Harrison R., Losasso M., Ordieres J., Pedrosa N., Poncet L., Pascoal R., Rajainmaki H., Rodriguez E., Sattler S., Scheller H., Theisen E.
Ключевые слова: ITER, coils toroidal, cable-in-conduit conductor, test results, welding, fabrication, deformation
Bellesia B., Buskop J., Harrison R., Bonito-Oliva A., Boter E., Caballero J., Cornelis M., Cornella J., Galvan S., Losasso M., Poncet L., Heikkinen S., Batista R., Carin Y., Cercassi J., Mauffrey P., Ginola M., Franchello E.*3 Barbero E.
Ключевые слова: ITER, coils toroidal, prototype, LTS, Nb3Sn, cable-in-conduit conductor, mechanical properties, stress effects, fatigue behavior, welding, fabrication
Bellesia B., Harrison R., Rajainmaki H., Bonito-Oliva A., Soto E.B., Boter E., Caballero J., Cornelis M., Losasso M., Batista R., Echeandia J., Felipe A., Larizgoitia I., Marin M., Merino A., Pando F., Pesenti P., Villa E.R., D’Urzo C., Valle N.
Ключевые слова: ITER, coils toroidal, winding techniques, status, fabrication, heat treatment, insulation, vacuum structure, pressure effect, LTS, Nb3Sn, cable-in-conduit conductor
Ключевые слова: HTS, Bi2223, YBCO, bulk, rings, current decay, stability, flux creep, experimental results
Hara M.(hara@ees.kyushu-u.ac.jp), Kurihara T., Suehiro J., Nakano R.
Ключевые слова: HTS, coils pancake, insulating medium, measurement technique, high voltage process, transformers, ac performance, power equipment
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.